SAVING IN WATER CONSUMPTION

The Exit Air Velocity in Coolflow Forced Draft Cooling Towers being low, the Carry Over Water Loss is just 0.05%, as compared to 0.2% in other Induced Draft Cooling Towers.

Coolflow Forced Draft Cooling Towers being closed from all the sides have a Negligible Spillage Loss. This also Eliminates any Algae Formation around the Cooling Tower.

SAVING IN SPACE CONSUMPTION

The clearance required for Coolflow Forced Draft Cooling Towers is only from one side in the Fan direction. Thereby, Saving 50% of Effective Space required, as compared to other Induced Draft Cooling Towers.

SAVING IN POWER CONSUMPTION

The Actual Power Consumed by Coolflow Forced Draft Cooling Tower Fan Motor is less, as they handle Dry Air, as compared to other Induced Draft Cooling Towers, which handle Humid Air.

TWIN FAN & TWIN MOTOR OPERATION

Higher Capacity Coolflow Cooling Towers are provided with TWIN FANS & TWIN MOTORS. The Cooling Tower can be operated on Part Load by switching Off one Fan & Saving Energy. In case of Motor Break Down, the Cooling Tower can still be operated on Part Load, rather than being Shut Down.

GRAVITY FLOW UNPRESSURISED DISTRIBUTION SYSTEM

Coolflow Forced Draft Cooling Towers operate with Twin Headers, ensuring Uniform Distribution of Hot Water throughout the Cross Section of Fill Pack. The Hot Water Distribution is completely Gravity Flow. Other Induced Draft Round Bottle Shape Cooling Towers operate with Moving Sprinkler & Branch Pipe, which always have more possibility of Blockage of Branch holes, thus, effecting Efficiency.

Moreover, the Distribution System of Coolflow Forced Draft Cooling Towers can be cleaned , while the System is in Operation, WITHOUT A SHUT DOWN. In case of Round Bottle Shape Induced Draft Cooling Towers, the Distribution System can only be attended, when the complete System is under SHUT DOWN.

EASY MAINTENANCE

The Fan Assembly and other Cooling Tower Internals are Easily Accessible. The Distribution System can be attended, while the Cooling Tower is in Operation. The Fan Assembly & Motor are easy to inspect, as they are installed near the Cooling Tower Foundation, as compared to other Induced Draft Cooling Towers.

REDUCED DOWN TIME DURING MAINTENANCE

Coolflow Forced Draft Cooling Towers can be easily Dismantled and Assembled back, during Periodic Routine Maintenance.